The Noxudol products, manufactured by AUSON AB of Sweden, provide innovative and environmentally friendly solutions for the underbody and stone chip protection of buses and railway vehicles on the long term, together with effective sound damping against their vibration.
The combined use of Noxudol 1100 és 3100 coatings increases the lifespan of buses and the comfort of  travelling.

The advantages of Noxudol 1100:

  • Polymer- and water-based product that perfectly adheres to most surfaces even without priming.
  • It provides long-term corrosion protection even with a dry layer thickness of 250 µm.
  • Its Zinc content further enhances corrosion protection, and the underbody protecting layer becomes “self-recovering” against smaller scratches.
  • Protection against road salt.
  • Effective stone chip protection certified by an independent and accredited laboratory.
  • Short drying time indicated by the colour change of the coating (turning black from blue).
  • Dry and elastic film with protecting effect.
  • It can be overpainted with the most industrial paints after full drying.
  • The floor will not become sticky during the application process. (Most of the bitumen undercoatings make the floor sticky.)
  • Economical application due to its high dry matter content.
  • Non-flammable, in contrast to bitumen undercoatings.
  • The product does not contain V.O.C., as a result, it does not increase the result of the annual solvent management report.
  • Easy, efficient and economical usage together with Wagner Airless equipment

The advantages of Noxudol 3100:

  • Polymer- and water-based product that perfectly adheres to most surfaces even without priming.
  • It provides effective sound damping in the wheel arches even with a dry layer thickness of 1500 µm.
  • Extreme stone chip protection certified by an independent and accredited laboratory.
  • It also contains a corrosion inhibiting additive.
  • Good heat insulation.
  • Effective damping of vibration and protection against condensation when applied in the interior of buses (side panels, roof).
  • Hard and elastic film with protecting effect, good adhesion to different tapes.
  • It can be overpainted with the most industrial paints after full drying.
  • Effective sound damping and extreme abrasion resistance when applied in the luggage compartment.
  • 30-40% lighter weight compared to commercially available sprayable sound damping compounds.
  • Economical application due to its high dry matter content.
  • Short drying time indicated by the colour change of the coating (turning black from blue).
  • Not classified as a hazardous mixture, non-flammable and does not contain V.O.C.
  • Easy, efficient and economical usage together with Wagner Airless equipment recommended by us.

REFERENCES: VAN HOOL, VOLVO BUSES.

Noxudol 3101 grants significant advantages to railway vehicle manufacturers, for instance:

  • Polymer- and water-based product that provides excellent adhesion to most surfaces even without priming.
  • Highly effective sound damping against noises caused by vibration.
  • Protection against condensation.
  • It also contains a corrosion inhibiting additive.
  • 30-40% lighter weight compared to commercially available sprayable of sound damping compounds.
  • Compliance with standard EN 45545-2 R1, R7 (HL3)
  • Hard and elastic film with protecting effect, good adhesion to different tapes.
  • It can be overpainted with the most industrial paints after full drying.
  • Not classified as a hazardous mixture and does not contain V.O.C.
  • Economical application due to its high dry matter content.
  • Short drying time indicated by the colour change of the coating (turning beige from grey).
  • Easy, efficient and economical usage together with Wagner Airless equipment recommended by us.

REFERENCES: ALSTOM, BOMBARDIER.

How can we contribute to the introduction of Noxudol technology?

  • As a first step, we provide a demonstration of products at your plant free of charge.
  • Secondly, we arrange free, documented adhesion, aging and corrosion resistance tests carried out on your basic surfaces in the manufacturer’s laboratory in Sweden, in compliance with the strictest Volvo Bus standards.
  • Thirdly, we provide the test spraying of one vehicle.

Click here, contact us and we protect your vehicle.

Please find more technical information in the below brochures.